Faculty Directory

Park, Jungjin

Park, Jungjin

Associate Research Scientist
Aerospace Engineering
1127 Manufacturing bldg

As a material scientist, I have broad research experience and interest in the fields of magnetic materials, cellular structured materials, bio-nanotechnology, and microfluidics. I received my B.Eng. in Metallurgical Engineering & Materials Science in 1998 from Hongik University, in Seoul, South Korea. I then went on to receive his Ph.D. in Materials Science and Engineering in 2006 at the University of Maryland, College Park. The title of the thesis was “Development of bioMEMS device and package for a spatially programmable biomolecule assembly”. During the graduate program, I contributed to developing a robust bioMEMS device and packaging technology realized as the fabrication and operation of microfluidic bioMEMS devices to exploit programmable biofunctionalization for metabolic engineering. I pushed ahead with new ideas, from improvements to new concepts, resulting in one of the most powerful bio-microfluidic platforms available. (Lab on a Chip 6 (10), 1315-1321, 2006).  After graduating, I was offered a position as a guest researcher at the National Institute of Standards and Technology (NIST). My experience at NIST involved the development of physical standards and methods for nanoscale measurements. The main objective was to establish new methods of elucidating and controlling nanoparticle adsorption/desorption on the surface of biological/synthetic templates. Particular effort has been devoted to the physical characterization (optical properties, hydrodynamic radius, and concentration) of luminescent nanocrystals (quantum dots) for biomolecular detection and imaging. (Soft Matter 6 (21), 5581-5588, 2010)

As I qualified as a scientist by my achievements and abilities in the areas of materials science and nano-biotechnology, I kept pursuing my career as a research scientist. I joined Prof. Alison Flatau's group as a postdoctoral fellow in the aerospace engineering department at the University of Maryland in 2009. As a team member of a nanostructured materials research group with Prof. Alison Flatau’s advising at UMD, I was responsible for developing a prototype biomimetic MEMS pressure sensor utilizing magnetostrictive Fe-Ga nanowire array as artificial cilia. In this research, I investigated various aspects of the nanostructured material properties by intensively using electron microscopes and scanning probe microscopies. I demonstrated magnetization rotation of Fe-Ga nanowires and measured hysteresis and magnetostriction of individual nanowires using magnetic force microscopy. (Journal of Applied Physics 107 (9), 09A954, 2010)

Most recently, I broadened my research area further to absorb more innovative trends in the field of aerospace engineering.  I started working with Prof. Norman Wereley on amorphous glass cellular structure and magnetorheological elastomer composite. Cellular structures are used in a wide variety of commercial and military applications as buoyancy foams, energy absorbers, heat exchangers, acoustic and thermal insulation, and lightweight structural components. I am investigating the sintering kinetics of glass foam and energy-absorbing properties with a material science background. (Materials and Manufacturing Processes 34 (9), 1026-1034, 2019)  Also, my research firstly is focused on 3-D printing MRE samples, followed by measurement of mechanical properties of the printed MRE with varying magnetic fields to see the magnetorheological effect.

As a material scientist, I have broad research experience and interest in the fields of cellular structured materials, nanotechnology, magnetic materials, and additive manufacturing.

Recently my three major research areas are:

1. Amorphous glass foams using hollow glass microspheres: Cellular structures are used in a wide variety of commercial and military applications as buoyancy foams, energy absorbers, heat exchangers, acoustic and thermal insulation, and lightweight structural components.  I investigate sintering kinetics and energy absorbing properties of glass foam. (Process parameter effects on cellular structured materials using hollow glass Spheres, J Park, et al, Materials and Manufacturing Processes 34 (9), 1026-1034, 2019) I developed a dry power printing (DPP) system which is a new manufacturing technique to fabricate amorphous glass foam using microspheres, enabling systematic productions of glass foams. I am interested in tunable stress–strain curves  thru co-cured bilayer formed using the DPP system to limit impact stress and achieve a higher energy absorption capacity. The interesting tunability feature of the co-cured bilayer foam would be achieved by programming the thickness of each layers so that the range of each plateau stress can be adjusted, allowing the control of energy absorption.

2. Development of E-glass sphere former system: Formation of hollow spheres relies on hollow jet instability phenomenon, although it should be noted that introduction of a coflowing finite density viscous fluid into the jet is a stabilizing influence. The primary parameters to be investigated are temperature and crucible pressure. My research will be focused on studying these parameters in conjunction with real time monitoring of sphere formation and after the relationship has been established, they will be coupled. Optical (Scanning Electron Microscopy), mechanical testing (Micro Compression Testing Machine) on individual sphere will be performed.

3. Flexible magnetorheological elastomer (MRE): Magnetorheological elastomers (MREs) serve important uses for vibration damping and smart material applications. My research is focused on 3-D printing MRE samples, followed by measurement of mechanical properties of the printed MRE with varying magnetic field to see magnetorheological effect.  The system is composed of carbonyl iron particles in thermoplastic polyurethane (TPU) matrix. 


  1. Book Chapters: Magnetostrictive Fe-Ga Nanowires for actuation and sensing applications AB Flatau, BJH Stadler, J Park, KSM Reddy, PR Downey, C Mudivarthi, 737-776  Magnetic Nano-and Microwires, , 2020
  2. Repulsive Magnetic Levitation-based Electromagnetic Energy Harvesting of a Low-frequency Ocean Wave, Jungjin Park, Ryan Pillai, Norman M. Wereley, and Alison B. Flatau.  AIP Advances, 14, 2024 (https://doi.org/10.1063/9.0000826)
  3. Design and Performance of a Compact 3D-Printed Magnetorheological Fluid Damper, Jungjin Park, Young T. Choi, Alison B. Flatau, and Norman M. Wereley.  IEEE Transactions on Magnetics, accepted,  59, no. 11, pp. 1-5, 2023 (doi: 10.1109/TMAG.2023.3299835.)
  4. Tunable Lightweight Energy Absorbing Foam Core Materials via Dry Powder Printing and Sintering of Hollow Glass Microspheres, Norman Wereley, Jungjin Park, John M Howard, Avi Edery, Matthew DeMay. SAMPE Journal, accepted, 2023
  5. Design and Performance of A 3D-Printed Magnetorheological Fluid-Based Adaptive Vibration Isolator, Young T. Choi, Byungseok Yoo, Jungjin Park, Darryll J. Pines, and Norman M. Wereley. Frontiers in Materials, 10, 1142590, 2023 (https://doi.org/10.3389/fmats.2023.1142590)
  6. Development of Magnetorheological Fluids within 3D Printed Elastomeric Cellular Structures with an Accumulator, Jungjin Park, Young T. Choi, Alison B. Flatau, and Norman M. Wereley. AIP Advances, 13, 025350, 2023 (https://doi.org/10.1063/9.0000604)
  7. Visco-Elastic Honeycomb Structures with Increased Energy Absorption and Shape Recovery Performance using Buckling, Colleen Murray, Min Mao, Jungjin Park, John Howard, and Norman Wereley. Polymers, 15, 3350, 2023 (https://doi.org/10.3390/polym15163350)
  8. Tunable Energy Absorbing Property of Bilayer Amorphous Glass Foam via Dry Powder Printing, Jungjin Park, John M Howard, Avi Edery, Matthew DeMay, Norman Wereley. Materials15, 9080, 2022 (https://doi.org/10.3390/ma15249080)
  9. Encapsulations of Magnetorheological Fluids within 3-D Printed Elastomeric Cellular Structures, Jungjin Park, Young-tai Choi, Alison Flatau, and Norman Wereley. IEEE Transactions on Magnetics, 58, no. 8, pp. 1-5, Art no. 4600805, 2022, (DOI: 10.1109/TMAG.2021.3137838)
  10. Magnetic particles reinforced elastomer composites for additive manufacturing. Jungjin Park, Andrew Becnel, Alison B. Flatau, and Norman Wereley, IEEE Transactions on Magnetics, 58, no.2, pp. 1-5, Art no. 2500905, 2022, (DOI: 10.1109/TMAG.2021.3084506)
  11. Bilayer glass foam with tunable energy absorbing property by localizing voids density, Jungjin Park, John M. Howard, Avi Edery, Matthew DeMay, and Norman Wereley. Advanced Engineering Materials, 2100105, 2021, ( https://doi.org/10.1002/adem.202100105)
  12. Process parameter effects on cellular structured materials using hollow glass Spheres, J Park, JM Howard, A Edery, M DeMay, N Wereley, Materials and Manufacturing Processes, 34 (9), 1026-1034, 2019 (https://doi.org/10.1080/10426914.2019.1594256)
  13. Electrodeposited Fe–Ga Alloy Films for Directly Coupled Noncontact Torque Sensing, M Hein, J Park, JA Cozzo, A Flatau, BJH Stadler, IEEE Sensors Journal, 19 (16), 6655-6661, 2019 (DOI: 10.1109/JSEN.2019.2906062)
  14. Magnetostrictive whisker sensor application of carbon fiber-alfenol composites, SM Na, JJ Park, NJ Jones, N Wereley, AB Flatau, Smart Materials and Structures 27 (10), 105010, 2018 (https://doi.org/10.1088/1361-665X/aad8c5)
  15. Magnetic and structural anisotropic properties of magnetostrictive Fe-Ga flake particles and their epoxy-bonded composites, SM Na, JJ Park, S Lee, SY Jeong, AB Flatau, Materials Letters 213, 326-330, 2018 (https://doi.org/10.1016/j.matlet.2017.11.052)
  16. Field-anneal-induced magnetic anisotropy in highly textured Fe-Al magnetostrictive strips, JJ Park, SM Na, AB Flatau, AIP Advances 7 (5), 056431, 2017 (https://doi.org/10.1063/1.4978006)
  17. Magnetostrictive Fe–Ga/Cu nanowires array With GMR sensor for sensing applied pressure, JJ Park, KSM Reddy, B Stadler, A Flatau, IEEE Sensors Journal 17 (7), 2015-2020, 2017 (DOI: 10.1109/JSEN.2017.2657789)
  18. Stress-anneal-induced magnetic anisotropy in highly textured Fe-Ga and Fe-Al magnetostrictive strips for bending-mode vibrational energy harvesters, JJ Park, SM Na, G Raghunath, AB Flatau, AIP Advances 6 (5), 056221, 2016 (https://doi.org/10.1063/1.4944772)
  19. Technique for measurement of magnetostriction in an individual nanowire using atomic force microscopy. Jin Park, Jung, Eliot C. Estrine, Sai Madhukar Reddy, Bethanie JH Stadler, and Alison B. Flatau  Journal of Applied Physics115(17), p.17A919. , 2014 (https://doi.org/10.1063/1.3673823)
  20. Hysteresis measurement of individual multilayered Fe-Ga/Cu nanowires using magnetic force microscopy. Jin Park, J., Reddy, M., Stadler, B.J. and Flatau, A.B.  Journal of Applied Physics113(17), p.17A331. , 2013 (https://doi.org/10.1063/1.3673823)
  21. Magnetization reversal mechanisms in 35-nm diameter Fe1-x Ga x/Cu multilayered nanowires. Madhukar Reddy, S., Park, J., Maqableh, M.M., Flatau, A.B. and Stadler, B.J.  Journal of Applied Physics111(7), p.07A920. , 2012 (https://doi.org/10.1063/1.3673823)
  22. Electrochemical synthesis of magnetostrictive Fe–Ga/Cu multilayered nanowire arrays with tailored magnetic response, SM Reddy, JJ Park, SM Na, MM Maqableh, AB Flatau, BJH Stadler, Advanced Functional Materials 21 (24), 4677-4683, 2011 (https://doi.org/10.1002/adfm.201101390)
  23. Characterization of the magnetic properties of multilayer magnetostrictive iron-gallium nanowires, JJ Park, M Reddy, C Mudivarthi, PR Downey, BJH Stadler, AB Flatau, Journal of Applied Physics 107 (9), 09A954, 2010 (https://doi.org/10.1063/1.3359852)
  24. Characterization of non-equilibrium nanoparticle adsorption on a model biological substrate, JJ Park, MC Weiger, SH De Paoli Lacerda, D Pristinski, ML Becker, Langmuir 26 (7), 4822-4830, 2010 (https://doi.org/10.1021/la903581w)
  25. Quantification of the binding affinity of a specific hydroxyapatite binding peptide, MC Weiger, JJ Park, MD Roy, CM Stafford, A Karim, ML Becker, Biomaterials 31 (11), 2955-2963, 2010 (https://doi.org/10.1016/j.biomaterials.2010.01.012)
  26. Interaction of gold nanoparticles with common human blood proteins, SHDP Lacerda, JJ Park, C Meuse, D Pristinski, ML Becker, A Karim,  ACS nano 4 (1), 365-379, 2010 (https://doi.org/10.1021/nn9011187)
  27. SPR imaging study of DNA wrapped single wall carbon nanotube (ssDNA-SWCNT) adsorption on a model biological (collagen) substrate, JJ Park, JA Fagan, JY Huh, KB Migler, A Karim, D Raghavan, Soft Matter 6 (21), 5581-5588, 2010 (https://doi.org/10.1039/C0SM00368A)
  28. Characterization of a specific hydroxyapatite-binding peptide using SPR imaging, MC Weiger, JJ Park, MD Roy, A Karim, ML Becker, Abstracts of Papers of the American Chemical Society 238, 2009 (https://doi.org/10.1016/j.biomaterials.2010.01.012)
  29. Langmuir adsorption study of the interaction of CdSe/ZnS quantum dots with model substrates: influence of substrate surface chemistry and pH, JJ Park, SHDP Lacerda, SK Stanley, BM Vogel, S Kim, JF Douglas, Langmuir 25 (1), 443-450, 2009 (https://doi.org/10.1021/la802324c)
  30. A fast-response microfluidic gas concentrating device for environmental sensing, S Li, JC Day, JJ Park, CP Cadou, R Ghodssi, Sensors and Actuators A: Physical 136 (1), 69-79, 2007 (https://doi.org/10.1016/j.sna.2006.11.035)
  31. Electrochemical study of chitosan films deposited from solution at reducing Potentials, RA Zangmeister, JJ Park, GW Rubloff, MJ Tarlov, Electrochimica acta 51 (25), 5324-5333, 2006 (https://doi.org/10.1016/j.electacta.2006.02.003)
  32. Chitosan-mediated in situ biomolecule assembly in completely packaged microfluidic devices, JJ Park, X Luo, H Yi, TM Valentine, GF Payne, WE Bentley, R Ghodssi, Lab on a Chip 6 (10), 1315-1321, 2006 (https://doi.org/10.1039/B603101C)
  33. Thin-film transformations and volatile products in the formation of nanoporous low- polymethylsilsesquioxane-based dielectric, P Lazzeri, L Vanzetti, M Anderle, M Bersani, JJ Park, Z Lin, RM Briber, Journal of Vacuum Science & Technology B, 23, 908, 2005 (https://doi.org/10.1116/1.1900734)
  34. ToF‐SIMS studies of nanoporous PMSSQ materials: kinetics and reactions in the processing of low‐K dielectrics for ULSI applications, P Lazzeri, GW Rubloff, L Vanzetti, RM Briber, M Anderle, M Bersani, .Surface and Interface Analysis, 36 (4), 304-310,  2004 (https://doi.org/10.1002/sia.1658)

Materials Research Society (MRS)

American Chemical Society (ACS)